A mezuzah should be attached to the doorpost rather than placed randomly on an interior wall or fixed to the moving door leaf.

For a main entrance, traditional placement is generally on the right-hand doorpost as a person enters the home from outside. It is normally positioned within the upper third of the doorway and permanently secured to an appropriate part of the doorpost.

Whether a mounting point described as “inside the front door” is suitable depends on what “inside” means and how the door frame is constructed.

Inside the House Is Not the Same as Inside the Doorway

A mezuzah case may appear protected within the entrance recess while still being attached to the correct doorpost.

This is different from placing it:

• On the wall several inches away from the opening

• Behind the open door

• On the door leaf

• On a decorative interior panel

• On the opposite side of the entrance

• In a position unrelated to the actual doorpost

Modern entrance doors may have deep frames, wall cladding, security trims, sidelight panels, offset pivots, or concealed jamb structures. These details can make the correct mounting surface less obvious.

When the doorpost shape is unusual, a qualified rabbi should be consulted before holes are drilled or adhesive is applied.

Which Side of the Front Door Is Normally Used?

Stand outside the property and face the entrance as though you are about to walk inside.

The right-hand side of the opening is normally the relevant side for the main entrance. The position is not determined simply by where the handle or hinges are located.

Interior doorways can involve additional considerations, including the direction of entry and the way the door opens. That is another reason not to apply one front-door rule automatically to every doorway in the building.

Where on the Doorpost Is It Placed?

The usual position is around the bottom of the upper third of the doorway.

The mezuzah should also remain attached to the doorpost rather than extending into a location where the door, handle, delivery cart, or moving furniture may strike it.

Very high doors, extra-wide jambs, arched entrances, pivot doors, and entrances with decorative columns may need individual guidance.

Large villa entrance doors sometimes have proportions that differ substantially from ordinary residential doors. The visual center of the frame is not necessarily the appropriate religious mounting position.

Can It Be Protected From Rain?

Exterior entrance areas may expose the case to rain, direct sunlight, salt air, dust, and temperature changes.

A weather-resistant outer case can help protect the scroll, but the case should not be assumed fully waterproof unless it was designed and sealed for outdoor use.

Possible protective measures include:

• Selecting a covered part of the correct doorpost

• Using a weather-resistant case

• Keeping the case away from direct drainage paths

• Avoiding screw holes that allow water into the frame

• Using a secure mounting method

• Inspecting the case after severe weather

• Following appropriate religious guidance for the exact location

The scroll itself should be protected from moisture. A case that develops condensation, cracks, or a loose cover should be checked.

Should It Be Attached With Screws or Adhesive?

The mezuzah should be fixed securely rather than temporarily balanced or loosely taped in place.

Screws can provide a durable connection, but they are not always suitable for every entrance-door frame. Drilling into a thermal-break aluminum profile, concealed drainage channel, reinforcement plate, electrical cable route, or narrow decorative trim can cause damage.

A durable mounting adhesive may be more appropriate for some surfaces, provided it creates a stable attachment and is suitable for the door-frame finish.

Temporary household tape can loosen because of heat, humidity, dust, or surface texture.

Before drilling, confirm:

1. The exact mounting position

2. The material behind the visible surface

3. The screw length

4. The presence of glass or wiring

5. The effect on corrosion protection

6. Whether the fixing may restrict door movement

Do Not Drill Into the Moving Door Leaf

The moving door is not the same as the doorpost.

Mounting the case on the door leaf can expose it to repeated vibration, impact, weather, and contact with the frame. It may also place it in the wrong religious location.

Modern pivot and offset-axis entrance doors make this distinction especially important. Their moving panel may visually overlap part of the frame, making a decorative surface appear to be a fixed jamb.

The installer should identify which components remain stationary when the door opens.

Planning the Mounting Area During Door Design

Religious and cultural requirements can be discussed before a custom entrance door enters production.

A project may need:

• A clear mounting area on the right doorpost

• A flat section without deep decorative grooves

• Adequate distance from the sealing strip

• Protection from direct rain

• No hidden electrical wiring in the mounting zone

• Suitable clearance from a pivot panel

• A finish that accepts the planned fixing method

These details can be added to a door drawing without changing the overall appearance of the entrance.

As an entrance door OEM / ODM manufacturer, we can review custom dimensions, door-frame structures, decorative panels, handle positions, lock systems, opening methods, finishes, and special mounting requirements before manufacturing begins.

Our production base uses laser and CNC processing to control frame and panel dimensions. Finished or semi-finished doors can be supplied according to the buyer's installation and hardware plan.

Discuss a Doorway Designed Around Real Use

Share the entrance drawing, wall-opening dimensions, door type, frame depth, opening direction, decorative-panel design, and required mezuzah mounting area with our technical team.

We can incorporate an appropriate flat mounting zone into an aluminum, stainless-steel, armored, pivot, or customized entrance-door structure while maintaining the intended appearance, sealing arrangement, and hardware layout.

Our OEM/ODM service covers drawing review, structural coordination, color and panel selection, lock preparation, sample confirmation, quality inspection, private-label requirements, and export packaging. Religious placement should still be confirmed by a qualified rabbi, while our factory can ensure the physical door structure provides a practical and clearly defined mounting surface.